152 Jewelers Tools For Ring Sizing & Jewelry Repair

91 Round Hole Drawplate

• This is a new 91 round hole drawplate
• This can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire
• The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily
• Occasional annealing will keep wire soft, and bees wax can be used as a lubricant
• The hole sizes are 0.12 mm to 5 mm
• It measures approximately 10 1/2" x 1 1/2" (266 x 37 mm)
  

Draw Tongs

• This is a new pair of draw tongs
• These are made of forged steel
• These pliers are used to draw or pull wire through draw plates
• Just grip the wire tight and pull

Fixed Saw Frame

• This is a new fixed saw frame
• This deluxe saw frame features rigid construction and fine balance for the serious craftsman
• This is not too heavy not too light just right to make sawing easy
• The throat depth measures approximately 4" (101 mm)
• The handle measures approximately 4 1/2" (114 mm) long
• It measures approximately long

Size 2/0 Forme d'Art Saw Blades

• This is a new set of 144 Forme d'Art saw blades
• This is a good inexpensive blade for novices and hobbyists
• These blades are the best jeweler tested blades for all metals, wood, plastic and more
• They are less likely to break and wander when cutting for a straight cut
• These saw blades are size 2/0
• Each measures approximately 5 1/4" (133 mm) long

New Pin Vise

• This is a new pin vise
• It is used as a hand drill with small twist drills
• The capacity is 1.3 to 3.1 mm
• It measures approximately 4 3/4" (120 mm) long

5 1/4" Steel Hand Vise

• This is a new steel hand vise
• The jaws open and close with a large wing nut
• The handle is hollow so that long wire will pass through
• Jaws are 7/16" (11 mm) wide and open to 1.5 mm
• It measures approximately 5 1/4" (133 mm) long

Revolving Bench Vise

• This is a new revolving bench vise
• This bench vise is for metal working jewelers or hobbyists
• It has 2" (50 mm) slightly angled jaws and opens to 1 3/8" (35 mm) max
• One jaw is flat and the other jaw features horizontal and vertical centerline grooves
• It revolves for ease of work and can be locked into position
• It has three holes on base for bench mounting

Deluxe Sliding Gauge 80 MM

• This is a new sliding gauge
• The has a smooth brushed finish with stamped numerals
• This can measures millimeters and inches
• 1/10 mm scale measures tenths of a millimeter
• It can measure up to 3 1/8" (80 mm)

12 Files

• This is a new set of 12 files
• These are made of stainless steel
• Each file has a shaped head on each end
• These are great for those small areas that you cannot get to with regular sanding or filing
• Each file measures approximately 5 3/4" (146 mm) long

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.