151 New Jewelers Tools For Making Wire And Repairing Jewelry.

Adjustable Flat Ingot Mold

• This is a new adjustable flat ingot mold
• This ingot mold is used to convert scrap into suitable shape for rolling
• The metal is melted in a crucible and poured into the mold
• This mold can be made smaller by adjusting the sides in a horizontal direction
• A c-clamp holds the sides of the mold in place, then easily releases them
• The mold measures approximately 70 x 45 x 4.5 mm (2 3/4" x 1 3/4" x 3/16")
• It holds approximately 150 dwt (233 grams) of metal

3 Draw Plates

This is a set of 3 jeweler's draw plates. With these drawplates you can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire. The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily. Occasional annealing will keep wire soft, and bee's wax can be used as a lubricant. These are of economical quality, which offers great versatility.

You receive:

• One 25 half round hole that measures approximately 6" (152.4 mm) long drawplate with hole sizes 5 x 2 mm to 3 x 1 mm
• One 71 round hole that measures approximately 6 1/2" (165.1 mm) long drawplate with hole sizes 2.5 mm to 0.12 mm
• One 20 square hole that measures approximately 6" (152.4 mm) long drawplate with hole sizes 3.3 mm to 1.7 mm

Draw Tongs

• This is a new pair of draw tongs with serrated jaws that provide an excellent grip when drawing wire
• The properly shaped handles insure a good continuous hold
• It measures approximately 10 1/4" (260.3 mm) long with jaws that measure about 1 5/8" x 3/4" (47 x 19 mm)

Melting Dish Holder with Handle & Melting Dish

• This is a new melting dish holder
• This melting dish with removable handle makes it easy to melt and pour metals
• The wooden resists heat, making for more comfortable work
• The fused silica dish with clay bond is suitable for melting metals with high melting points, including platinum
• The overall length is approximately 15" (38.1 cm), while the dish is approximately 2 7/8" (66.5 mm) in diameter and 1 5/16" (33 mm) tall

Fixed Jeweler's Saw Frame

• This is a new fixed saw frame
• This deluxe saw frame features rigid construction and fine balance for the serious craftsman
• It is made of the finest materials
• If you haven't found the right saw frame then this is the one for you
• This is not too heavy not too light just right to make sawing easy
• Measurements:
• Throat Depth: 4"
• Handle: 4 1/2" long

144 Size 2/0 Saw Blades

• This is a new set of 144 size 2/0 saw blades
• This is a good inexpensive blade for novices and hobbyists
• Sold as one gross
• These blades are the best jeweler tested blades for all metals, wood, plastic, and more
• These are less likely to break and wander when cutting for a straight cut
• They are manufactured to exacting tolerances for angle, size and cut of each tooth
• A unique tempering process ensures consistent flexibility and long blade life

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.