Combination Rolling Mill For Making Flat, Square & Half Round Sheet Stock
This is a new combination rolling mill with 5 rollers. This is a well made rolling mill used for rolling out silver, gold, etc. into wire or sheet. Rollers are fabricated from selected high carbon steel. Has a Rockwell hardness of 80 - 82. Capable of producing metal foil as thin as 0.001". 4:1 Ratio Gearbox designed to transfer force from the handle to the rolls with minimal effort from the operator. This unit is very versatile and will do flat, square and half round sheet stock. Made in India.
Specifications:
- Two flat rollers that measure approximately 3" (76 mm)
- One grooved roller that measures approximately 3" (76 mm)
- Two patterned rollers with a different pattern on each half that measure approximately 3" (76 mm)
- It has a maximum opening of 0 - 7 mm
- Color may vary from picture
To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.
