7 New Lapidary Templates & Gauges

3 Lapidary Templates

• This is a new set of 3 lapidary templates
• These are used for calibrating stones into shapes that will fit in standard settings
• The gauges give you all of the most popular sizes and makes it easy to draw an exact size without guessing
• Each has a 0 - 10 centimeter scale on the bottom
• Includes one aluminum scribe
• Sizes on gauge: 10 x 8, 11 x 9, 12 x 10, 14 x 10, 14 x 12, 16 x 12, 18 x 13, 20 x 15, 40 x 30, 30 x 22, 25 x 18, 24 x 14, 20 x 12, 16 x 8, 16 x 9, 18 x 9, 22 x 8, 24 x 10, 24 x 10, 7, 8, 9, 10, 12, 14, 16, Dime:18, Dollar: 38, Half Dollar: 30.5, Quarter: 24.2, Nickel: 21, Penny: 19
• Shapes included are circles, ovals, squares, rectangles, crosses, hearts and other miscellaneous shapes
• All sizes are in millimeters

Sliding Brass Gauge

• This is a new sliding brass gauge
• The smooth brushed finish and fine, crisply stamped numerals and lines on this high-quality gauge ensure a long, productive life for this instrument
• It measures millimeters and inches
• It has 1/10 mm scale measures tenths of a millimeter
• It measures up to 100 mm

5" Vernier Gauge

• This is a new Vernier gauge
• Economical quality gauge measures in metric and inches
• Vernier reads to 1/128" or 1/20" of a mm
• It has a thumb roller and locking screw
• The jaws measure inside and outside and there is a depth gauge in the end
• It measures approximately 5" (127 mm)

3" Machinist Square

• This is a new machinist square
• This square is at an exact 90 degree angle
• It is perfect for sharp corners, centering stones and a wide variety of other uses
• It measures approximately 3" (76 mm)

4" Machinist Square

• This is a new machinist square
• This square is at an exact 90 degree angle
• Perfect for sharp corners, centering stones and a wide variety of other uses
• It measures approximately 4" (101 mm)

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.