Combination Rolling Mill With 153 Jewelers Tools For Making Jewelry

Combination Rolling Mill

This is a new combination rolling mill. Made from plate steel, not cast metal, allowing for better geometry, closer tolerances and greater durability. This unit is very versatile and will do flat stock, square and half round wire without changing rollers. The rollers fabricated from selected high carbon tool steel. Has a Rockwell hardness of 60 - 62. Capable of producing metal foil as thin as 0.001". 4:1 Ratio Gearbox designed to transfer force from the handle to the rolls with minimal effort from the operator. Made in Europe.

Specifications:

• Roller width measures approximately 3 9/16" (90 mm)
• Roller diameter measures approximately 1 11/16" (42 mm)
• Square Wire: 1.5, 2, 3, 4 and 5 mm
• Flat stock: 1 7/8" (48 mm)
• Ring shank half round: 2.5 x 1, 3 x 1.25 and 4 x 1.5 mm
• It measures approximately 10" x 4 3/4" x 10.28" (254 x 120 x 261 mm)

5 Drawplates

This is a new set of 5 drawplates. With these drawplates you can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire. The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily. Occasional annealing will keep wire soft, and bees wax can be used as a lubricant. Economical quality, which offers great versatility.

You receive:

• One 30 square hole drawplate that measures approximately 6" (152 mm) long
• One 30 round hole drawplate that measures approximately 8 1/2" (215 mm) long
• One 30 oval hole drawplate that measures approximately 8 1/2" (215 mm) long
• One 30 hexagon hole drawplate that measures approximately 8" (203 mm) long
• One 82 round hole drawplate that measures approximately 6" (152 mm) long

8" Draw Tongs

• This is a new pair of draw tongs
• These have serrated jaws that provide an excellent grip when drawing wire
• The properly shaped handles insure a good continuous hold
• It measures approximately 8" (203 mm) long

144 Size 2 Saw blades

• This is a new set of 144 saw blades
• These are good inexpensive blade for novices and hobbyists
• Sold as one gross
• These saw blades are size 2
• These blades are the best jeweler tested blades for all metals, wood, plastic and more
• These are less likely to break and wander when cutting for a straight cut

Black Mini Pin Vise

• This is a new pin vise
• This pin vise holds a variety of tools for precision work
• It can be used as a hand drill with small twist drills and holds wire, stock or tubing for filing
• It has a single collet
• It's chuck capacity is 0" - 0.125"
• It measures approximately 3 1/2" (88 mm)

Bench Vise

• This is a new bench vise
• It has 1 1/4" (31 mm) slightly angled jaws
• This bench vise is great for metal working jewelers
• It mounts to your desk using built in clamp
• The clamp adjusts to accommodate benches up to 1 1/8" (28 mm) thick

5" Vernier Gauge

• This is a new vernier gauge
• This economical quality gauge measures in metric and inch
• The capacity 5" or 127 mm
• Vernier reads to 1/128" or 1/20 of a mm
• It has a thumb roller and locking screw
• Jaws measure inside and outside and there is a depth gauge in the end

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.