Two 63 Round Hole Drawplates For Shaping Wire - This is a new set of two 63 round hole drawplates
- These drawplates can reduce and shape thickness of gold, silver, platinum, brass, copper or soft steel wire
- The holes are progressively smaller, in proper increments, so that wire drawn from a preceding hole will go through the next hole easily
- Occasional annealing will keep wire soft, and bees wax can be used as a lubricant
- The hole sizes are 0.013 mm - 1.5 mm
- Each measures approximately 4 1/2" x 1 3/16" (114.3 x 30 mm)
To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.
|