27 Jewelers Dapping Punches T-Shaped Anvil Bench Blocks

Brass Dapping Block

• This is a new brass dapping block
• The depressions have a smooth finish that are great for shaping metal
• The half spheres are precision machined and hardened to perfection
• Has various sized depressions that measure up to approximately 31.75 mm (1.25")
• The block measures approximately 1 1/2" x 1 1/2" x 1 1/2" (38 x 38 x 38 mm)

24 Dapping Punches & Block

• This is a new set of 24 dapping punches and block
• Used for shaping, forming and chasing metal in dapping blocks
• The block has 18 half spheres and measures approximately 2" x 2" x 2" (51 x 51 x 51 mm)
• Includes 24 individual punches: 2.3, 3.5, 4.3, 5.1, 5.9, 6.7, 7.5, 8.3, 9.1, 9.9, 10.7, 11.5, 12.3, 13, 13.8, 14.6, 15.4, 16.2, 17, 18.6, 20.2, 21.8, 23.4 and 25 mm
• The wood stand holds the block and all 24 punches and measures approximately 7 3/8" x 4 11/16" x 1 3/8" (187.8 x 118.6 x 35 mm)

Bench Block

• This is a new bench block
• Useful for flattening, laying out or chasing
• This is constructed of tool steel, ground flat, polished and case hardened
• Great for silversmiths, blacksmiths, planishing and anyone who uses a anvil or staking tools
• It's hardness is 46 to 50 Rockwell
• It measures approximately 2 1/2" x 2 1/2" x 3/4" ( 63.5 x 63.5 x 19 mm)

T-Shaped Anvil

• This is a new t-shaped anvil
• Used for flattening and shaping
• Has flat and round horns
• It measures approximately 4 1/8" (105 mm) from tip to tip and measures about 4 1/4" (108 mm) tall

FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.