7 New Clock Hole Closing Punches

This is a new set of 7 clock hole closing punches. These are for reducing hole sizes in brass plates in clocks, meters, etc. Spring center guides punch so that it will be concentric. Punches are tapped with a small hammer.

• Size 1/0, 2 mm
• Size 1, 2.1 mm
• Size 2 , 2.6 mm
• Size 3, 3 mm
• Size 4, 3.5 mm
• Size 5, 4.1 mm
• Size 6, 4.6 mm

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.