Ring Stamping Marking Tool Jewelers Jewelry A-Z 0-9 New

This is a new ring stamping set. Can be used on curved or flat surfaces to stamp inside rings. Little pressure is required to stamp precious metals including white gold. Has an adjustable screw to lock the stamp in place. Each character measures approximately 1.5 mm. Comes in a wood storage box.

You receive:

• One stamping tool
• Letters A - Z
• Numbers 0 - 8, the 6 can also be used as a 9
• One & symbol stamp
• One period stamp
• One 9K stamp
• One 10K stamp
• One 14K stamp
• One 18K stamp
• One 21K stamp
• One 22K stamp
• One 23K stamp
• One KDM stamp
• One 916 stamp
• One 750 stamp
• One 585 stamp
• One 925 stamp

Instructions

A marking stamp (such as "14K") is placed in the bottom "jaw" of the tool. This is the part of the tool which does not move when you squeeze the handle.

Then a supporting die is installed in the other jaw (this part moves when you squeeze the handle). Three supporting dies are included: flat, curved, and vinyl. One die is chosen based on the outer shape of your ring. Most rings will used the curved die. The vinyl die can be used if you need to prevent outside marring on the ring, if the ring should have a special design or texture.

The ring is then placed around the bottom jaw with the marking stamp facing the inner part of the ring you want stamped. Just squeeze the handle and the supporting die will push the interior of the ring towards the marking stamp. Once the ring is between the supporting die and marking stamp, additional pressure will perform the actual stamping.

To change the stamp and die, two hex tools are included to loosen or tighten the hex screws which hold the dies in place. The larger hex tool is used for the marking stamp, and the smaller one is used for the supporting die.

FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

To reduce rust in storage, metal tools received may come in packing grease or oil. To remove packing grease we recommend using degreaser and a rag.